Kaishan Purification Equipment

Product Combination: Q/P/S/C four-stage precision filter, refrigerated air dryer, heatless/heat regenerative desiccant dryer, oil water separator, dust purifier

Filtration Accuracy: Pre-filter 5μm, medium filter 1μm, precision filter 0.01μm, ultra-precision residual oil 0.001ppm

Pressure Dew Point: Refrigerated dryer 2℃~10℃, desiccant dryer -20℃~-70℃

Treatment Flow: 0.6m³/min ~ 60m³/min, match full power air compressors

Working Pressure: Standard 0.7MPa~1.3MPa, high pressure type up to 1.6MPa

Filter Media: Glass fiber, polyester fiber, PTFE membrane, activated carbon

Housing Material: Aluminum alloy, painted carbon steel, stainless steel

Original Full-Model Compatibility & Flexible Modular Combination
Fully matched with Kaishan compressors in ports, flow and pressure parameters, suitable for screw, piston and VFD models. Independent modular design allows series or parallel combination freely, from single filter to large complete purification unit, adapting to different air volume and cleanliness standards.
Graded Full-Scale Purification
It removes liquid oil, water droplets, dust and oil mist step by step, solving three major problems of compressed air: moisture, oil and dust. Effectively prevent blockage and corrosion of pneumatic valves, cylinders and precision equipment.
Two Dryer Types for Full Dew Point Coverage
Cost-effective refrigerated dryer for general industrial drying; low-dew-point desiccant dryer for electronics, pharmaceutical and semiconductor industries. The two types complement each other to cover all industrial drying demands.
Low Pressure Loss & System Energy Saving
Fluid-optimized internal channels ensure smooth air flow. The pressure loss of single unit is ≤0.02MPa, and the total loss of complete unit is controlled within a reasonable range, without increasing compressor load and reducing long-term energy consumption.
High-Quality Filter Media & Low Maintenance Cost
Adopting imported glass fiber, PTFE membrane and activated carbon media with strong dirt holding capacity and good durability. Folded filter cartridge extends replacement cycle. The automatic drain device eliminates frequent manual drainage and cuts labor and spare parts cost.
Multiple Housing Materials for Wide Condition Adaptation
Lightweight aluminum alloy for regular workshops; cost-effective painted carbon steel for general use; rust-proof stainless steel for chemical and humid environments. Three material options meet diverse on-site demands.
Multiple Safety Protection & Stable Operation
Full-circle oil-resistant gaskets prevent air leakage; automatic drain avoids liquid backflow; differential pressure monitor gives early warning for cartridge clogging. IP54 dust and splash proof, optional explosion-proof structure ensure long-term safe operation.
Easy Installation & Complete Supply System
Standard flange and pipe ports connect compressors and air receivers conveniently without complex modification. Full specifications are in stock. Filter elements and drain valves are available in bulk. We support export of single units, spare parts and complete systems with overseas technical guidance.